AT&T 1760 Answering Machine User Manual


 
19
Delete Messages
Delete All Messages
1 Connect with the answering system
2 After you have listened to all messages and heard the two beeps, press 33. All
messages are deleted. (If you haven’t listened to messages, you will hear an error
tone, and the messages will not be deleted.)
Delete Selected Message
Press 3 while the message is playing.
Record Announcement
1 Connect with the answering system.
2 Press 7*.
3 Speak after the beep, then press 5 to stop recording. The system replays your new
announcement.
To review your announcement — Press 71.
Record a Memo
1 Connect with the answering system.
2 Press # and begin speaking after the beep.
3 Press 5 when you are finished.
Room Monitor with Intercom
You can call the answering system and listen to any activity in the room.
1 Connect with the answering system.
2 Press 98to listen for 30 seconds.
3 If you wish,you can press 8 while the monitor is active to speak to someone in
the room (up to 30 seconds).
4 Press 8 again during intercom operation to return to listening only.
5 Press 5 or # at any time to exit Room Monitor with Intercom.
ANSWERING SYSTEM OPERATION
FROM A REMOTE TOUCH TONE PHONE
1760_book_1AT&T 5/1/00 7:38 PM Page 19