AT&T 1460 Cordless Telephone User Manual


 
4 1
If you have difficulty operating this phone,try the suggestions below.
For Customer Service,visit our website at www.telephones.att.com or
call 1 800 222–3111. Please retain your receipt as your proof of
p u rc h a s e.
TELEPHONE OPERATION
PROBLEM SOLUTION
If the phone doesn’t • Make sure the AC adapter is plugged into
work at all, check these an outlet not controlled by a wall switch.
items first: Make sure the telephone line cord is
plugged firmly into the base unit and the
modular jack.
Make sure the base antenna is fully
upright.
If the handset does not beep when you
press , the battery might need
charging.
Make sure the battery pack is installed
correctly.
• If you have dial pulse (rotary) service on
your phone line,make sure the dial mode
is set to dial pulse (see INSTALLATION).
• Microwave appliances may cause
interference with this phone.If you
experience interference,move away from
the microwave.
PROBLEM SOLUTION
If the above suggestions 1 Disconnect the power to the base.
don’t solve the problem, 2 Remove the handset battery pack.
try re-initializing the 3 Wait a few minutes.
handset and base: 4 Connect the power to the base.
5 Insert the handset battery pack.
6 Put the handset in the base to
re-initialize.
IN CASE OF DIFFICULTY
91-5387-30-00_ATT1460_R1 2003.3.27 10:21 AM Page 41