AT&T 1440 Cordless Telephone User Manual


 
1 0
Operating Range
This cordless telephone operates within the maximum power allowed
by the Federal Communications Commission (FCC). Even so, this
handset and base can communicate over only a certain distance —
which can vary with the locations of the base and handset, the weather,
and the construction of your home or office. For best performance,
keep the base antenna fully upright.
If you receive a call while you are out of range, the handset might
not ring — or if it does ring,the call might not connect when you press
. Move closer to the base,then press to answer the call.
If you move out of range during a phone conversation, you might
hear noise or interference. To improve reception,move closer to the
base.
If you move out of range without pressing , your phone will be
left “off the hook. To hang up properly, walk back into range,
periodically pressing .
Headset Jack
You can use this telephone hands-free when
you install any AT&T 2.5 mm headset,
purchased separately.
Plug the headset into the jack located
on the right side of the handset
(under the small rubber flap).
Do not force the connection,
but make sure the plug
fits securely.
91-5393-20-00_ATT1440_R0 2003.3.7 10:47 AM Page 10