Filter
Top Products
Remote Access Code
You can use many features of this answering system remotely from a touch
tone phone. Most features can be accessed only after you enter a Remote
Access Code. (The preset Remote Access Code is printed on the label on the
bottom of the answering system.)
Connect with the Answering System and Listen to Messages
1 Dial your telephone number from a touch tone phone.
2 When the system answers, press * * during the announcement, wait for
the beep, then enter your four-digit Remote Access Code. The system
sounds one long beep, then begins playing messages.
3 After playing messages, the system sounds a two-beep signal to let you
know it is ready to accept a remote command.
4 After playing the last message, the system beeps twice.
To rewind — Press 7 7.
To fast forward — Press 9 9.
To save all messages — Hang up.
To clear all messages — Press 0 0.
To stop playback — Press 8 8.
To play/stop announcement — Press 4 4.
To record/stop announcement — Press 5 5.
Changing Your Remote Access Code
The Remote Access Code is preset to 1234. Changing the Remote Access Code
also changes the Priority Calling Code. (You can change the Remote Access
Code only from a remote touch tone phone.)
1 Connect with the answering system and listen to messages.
2 Press 1 1. The system beeps twice.
3 Enter your new four-digit Remote Access Code. The system beeps once.
4 Enter your new code again. The system sounds a long beep to confirm the
new code.
REMOTE OPERATION
8