Filter
Top Products
A-26
Appendix: Reference information
• Make sure the phone is set up correctly.
• Wait for the remote party to be online.
Q11. Why can I not hear any sound from the phone while the Wireless Link
USB dongle is plugged in to the PC and the wireless setup is properly
established?
A11. When the Wireless Link USB dongle is plugged in to the USB port of your PC,
the Phone Voice stream will be routed to the handset. If you cannot hear any
voice from the phone, check the setting of Sound Devices in Skype
TM
. Go
to Skype™ > Tools > Options > Sound Devices and make the following
settings:
Audio In: Virtual Cable 1
Audio Out: Virtual Cable 2
Ringing: Virtual Cable 2
Q12. Why can I not hear any sound from the PC speakers for normal PC
operation while the Wireless Link USB Dongle is plugged in to the PC?
A12. The PC default audio setting might be in the wrong order. You can change back
the setting of your PC audio by going to Control panel > Sound > Speech
and Audio Device > Sound and Audio Device > Audio. Check Only use
default devices.
Q13. What will I do if the phone is out of operating range? How come no signal
is detected?
A13. When the phone is out of the Wireless Link USB dongle’s operating range, the
phone will keep accessing its signal source for 30 seconds. If detecting the
signal fails, the screen shows the message “WiFi Disconnect” and then goes
into sleep mode.
To regain the connection, move the handset closer to the Wireless Link USB
dongle and press any key on the handset for access retrieval.