Asus A636 PDAs & Smartphones User Manual


 
Setting up MyPal
Using the GPS car kit
The GPS car kit includes a car
holder and gooseneck. Use the
car charger to supply DC power
to the device through the car’s
cigarette lighter socket.
1. Attach the gooseneck to the
car’s windshield.
2. Carefully slide the device
into the holder.
3. Connect the car charger to
the power jack at the lower
side of the holder.
4. Plug the other end of the car
charger to the cigarette
lighter socket.
NOTE The charging status LED
shows a steady red light as battery
is being charged and steady green
when battery is fully charged.
NOTE Install the battery before connecting the AC adapter to a power source. See
“Installing and removing the battery” of the User Manual for proper battery installation.
Connecting power adapter and charging the battery
NOTE The device must carefully
be placed into the holder to avoid
damaging the 26-pin device
connector and causing the device
to breakdown.
2
1
3
4
Vertical orientation
Horizontal orientation
2
1
3
4
1
2
3