Filter
Top Products
Receiving Calls
Receiving Calls Using a
Standard Analog Telephone
Line
1. When there is an incoming call,
the built-in RING FLASHER
flashes.
2. Press the Spacebar to answer.
3. Begin typing.
4. To turn OFF the Q90D, hold
down CTRL and press Power.
Receiving Calls in Cell
Phone Standby Mode When
a Phone is Already
Connected to the Q90D
1. Plug the cellular telephone or
cordless phone into the Q90D.
2. Turn ON the Q90D, hold down
CTRL and press F3.
3. When a call comes in and the
CELL FLASHER light flashes, turn
ON your cellular or cordless
telephone.
4. Press the Spacebar and start
typing.
5. When finished, turn OFF the
cellular or cordless phone.
6. Hold down CTRL and press F3 to
return to the cell phone Standby
mode or turn OFF the Q90D by
holding down CTRL and pressing
Power.
Receiving Calls Using a
Digital Cellular or Cordless
Telephone When a Phone is
Not Already Connected to
the Q90D
1. When you know that a call is
coming in, connect your cell
phone or cordless phone to the
Q90D with a connecting cord.
2. Turn ON your cell phone or
cordless phone.
3. Press Power to turn ON your
Q90D.
4. Type your response.
5. When you are finished with the
conversation, turn OFF the
cellular or cordless telephone.
6. To turn OFF the Q90D, hold
down CTRL and press Power.