Filter
Top Products
6
CHAPTER 3
(CONTINUED)
SECONDARY FUNCTIONS
For a detailed explanation of the Secondary Functions, see Chapter 7.
F8
SAVE
F11
FLASH
F12
STICKY
F1
DIAL
F4
VCO REQ.
F5
MSG 1
F6
MSG 2
F7
Hi-SPEED
F13
MENU
Ctrl
Ctrl
Ctrl
Ctrl
Ctrl
Ctrl
Ctrl
F9
HCO
Ctrl
F10
TRANSF
Ctrl
Ctrl
!
1
Ctrl
Q
Ctrl
A
Ctrl
Z
Ctrl
B
Ctrl
Ctrl
Ctrl
F2
REDIAL
Ctrl
Shift
Shift
F3
QUICK#
Shift
ON/OFF Line- switch between on-line and off-line
(page 20)
Wait- activate “Waiting for Response” function (page 20)
Cell Flash- turns on the ring flasher for incoming cell phone or
cordless phone calls when the cradle is removed.
(page 20)
VCO Mode- function in VCO mode (page 20)
Mic- turns on the microphone if the VCO mode is on.
(page 20)
Backlight- turn the backlight on or off. (page 20)
Print M- print the conversation memory (page 21)
Enter Password- save a 10 digit password (page 21)
Interruption- turn interrupt function on or off (page 21)
Speakerphone- function in speakerphone mode (page 21)
Pls Hold- send “Pls Hold” message (page 21)
Hello GA- send “Hello GA” message (page 21)
(Smile)- send “(Smile)” message (page 21)
..Ha Ha Ha..- send “..Ha Ha Ha..” message (page 21)
Send Buffer- transmit conversation buffer content (page 21)
Reset- set Q90 to factory default settings (page 21)
Erase #’s - erase all programmed phone numbers (page 21)
Erase M- erase entire conversation memory (page 21)
and the Q90 will...
Hold
down...
and
press