Filter
Top Products
TEXT
CHAPTER 6
TROUBLESHOOTING
If any problem should arise during operation of your DIALOGUE
JB-20
,
go through the suggestions listed below. Should the difficulty persist,
contact Ameriphone or your authorized dealer for assistance.
CAUSE AND
CORRECTIVE ACTION
Check all phone cord con-
nections.
No number stored in that
memory button. See
"Programming Frequently
Dialed Numbers
See "Installation" section to
reset the dial mode switch.
Make sure the ringer is not
set to "Off" position.
Check all the connections.
Make sure the cords are
plugged in
correctly.
SYMPTOM
No dial tone
No number
dialed when memory
button pressed
Call cannot be dialed,
or is dialed slowly
No audible ring
Phone ”locks- up“; no
functions operate
10