Filter
Top Products
Using Your Dialogue XL-50
Caution: Repeated incremental expo-
sure to amplification levels greater
than 18 dB may be harmful to indi-
viduals without hearing disabilities.
Therefore, do not remove the warning
label attached to the back of the
handset. If it is likely that a visually
impaired person will use the tele-
phone, securely attach the provided
warning printed in Braille to the back
of the handset (See, Diagram A).
Note: In standard use, the amplifier
turns off whenever you hang up the
telephone. This is a useful feature if
many people use the phone. If you
want the amplifier to always remain
on, slide the Volume Reset Override
switch on the back of the phone to
ON, as shown in Figure 10.
Incoming Voice Volume
You can adjust the volume of incom-
ing calls by simply sliding the VOL
control. This gives you up to 18 dB.
If you want more amplification, follow
the directions below.
1. Press the
AMPLIFY button as
shown in Figure 8 to turn the
incoming voice amplifier on or off.
When
AMPLIFY is on, the
AMPLIFY indicator comes on.
2. Adjust the volume in the ear piece
by moving the
VOL slide control in
Figure 9. With AMPLIFY on,
incoming volume will be up to
48dB louder.
P
E
0
#
HOLD PROG
TONE
LO HI
FLASH REDIAL
VOL
AMPLIFY
*
E
0
#
HOLD PROG
TONE
LO HI
FLASH REDIAL
VOL
AMPLIFY
*
Figure 9 - Volume Slide Control
MANUAL
AUTO
Figure 8 - AMPLIFY Button
and Indicator
Figure 10 -
Volume Reset Override
On/Off
6
Diagram A.
- OFF
- ON
Volume
Reset
Override
LOUD
VOLUME
USE WITH
CAUTION