Filter
Top Products
E
N
G
L
I
S
H
Channel Setting
setting on all components.
1. Unplug, and locate
DIP switches on the
underside of the
AM-RX2.
2. Unplug and locate DIP
switches on the under
side of the AM-6000
console.
3. Use a pen to change
the DIP switch
position on both
units. For example,
change the position
of switch #4 on both
units. All settings need
to be identical for the
system to work. See
Fig. 3.
4. It will be necessary to
change the switch
settings on each of
your other accessories
(Doorbell Announcer,
Audio Alarm
Transmitter, Baby
Sound Monitor, etc.).
See AM-6000
Operating Instructions.
13