Filter
Top Products
E
N
G
L
I
S
H
8
Using Your XL-40
(Continued)
Note: In standard use, the amplifier
turns off when you hang up the
telephone. This is a useful feature
if many people use the phone. If
you want the amplifier to always
remain on, slide the Volume Reset
Override switch on the bottom of
the phone to ON, as shown in
Figure 11.
Incoming Voice Tone
The XL-40 provides extra
amplification in the sound frequency
range you need to boost. To
identify the range that best suits
your needs, follow these steps:
1. When you hear a voice on the
line, press the AMPLIFY button
shown in Figure 9.
2. Adjust the TONE slide control in
Figure 12 to suit your hearing.
Figure 11 - Volume Reset Override
On/Off
MANUAL
AUTO
- OFF
- ON
Volume
Reset
Override
0
#
HOLD PROG
TONE
LO HI
FLASH REDIAL
VOL
AMPLIFY
*
Figure 12 - Tone Slide Control
RINGER
RING TONE DIAL
AUDIO
OUTPUT
Lo Med Hi
T P
Lo Hi
Figure 13 - Ringer Volume & Pitch
Ringer Volume and Tone
1. You can adjust the RINGER
VOLUME
as high as 95+
decibels. The settings available
are
LO, MED and HI as shown
in Figure 13.
2. The
RING TONE has two pitch
settings:
LO and HI.
Hold
To put the line on hold, press the
HOLD button and return the hand-
set to its cradle. You will notice the
HOLD indicator light comes on.