Aiphone LE-B10 Intercom System User Manual


 
Aiphone Communication Systems
1700 130th Ave. N.E.
Bellevue, WA 98005
(425) 455-0510
FAX (425) 455-0071
TOLL FREE TECHNICAL SUPPORT:
(800) 692-0200
TOLL FREE FAX LINE:
(800) 832-3765
E-MAIL: tech-serv@aiphone.com
Pg. 3
LEB24610 Instr.
1205JDJS
MOUNTING INSTRUCTIONS:
Call
Button
1. Cut a hole in the wall that is 9-1/16" x 6-1/8". (Ensure
that a mounting depth of at least 2-11/16" is available.)
2. Pass cable through knockout holes.
3. Secure mounting box to wall so that front of mounting
box is flush with the outside edge of the wall.
4. Connect wires to the unit. (See wiring diagram)
5. Attach the unit to mounting box using the supplied
screws.
DIRECTORY LAMP INSTALLATION:
1. Attach the lamp mounting plate as shown in the
drawing using the supplied screws. The lamp should
face the back of the mounting box and point down.
2. Connect the RED wire to “+” of the PS-1225UL.
3. Connect the BLACK wire to the “-“ of the PS-1225UL.
4. Lamp is 12VDC, 1W.
ENTERING TENANT’S NAME:
1. Remove the directory card cover by pressing on the
edge of the card cover next to the call button.
2. Remove the directory card in the same manner.
3. Fill in the tenant’s name in the space provided.
4. Replace card and cover.