MOUNTING & INSTALLATION
Pg. 2
Installation Location:
Care should be taken when choosing the best
location for mounting the JK-DVF-XP. Do not
install the video door station in any areas
subject to direct sunlight or other strong direct
lighting conditions; installation in such
locations may cause reduced visibility and/or
video quality while viewing from the master
station.
Mounting Height & Viewing Angle: Wide and Zoom Picture
Physical Mounting Instructions:
1. JK-DVF-XP – provide wall surface opening for rough-in
backbox (supplied), using dimensions shown (Fig. 1).
Note: if surface mount is required, use the Aiphone
SBX-DVF-P (sold separately) .
2. Connect the 2 conductor wire to
terminals A1 and A2 on back of unit.
3. JK-DVF-XP – Secure the door station to
the backbox using the included security
screws / driver (Fig. 1).
Figure 1
20"
JK-DVF-XP
170° angle of view
Wide Up/Down Wide Left/Right
Zoom Center Zoom Down
3'5"
5'
20"
JK-DVF-XP
3'2"
6'7"
2'10"
5'
20"
JK-DVF-XP
2'6"
5'4"
2'4"
5'
20"
JK-DVF-XP
3'9"
6'1"
2'10"
5'
20"
JK-DVF-XP
4'7"
7'5"
8-7/16"
1-25/32"
4-1/2"
JK-DVF-XP
20"
JK-DVF-XP
20"
JK-DVF-XP
Zoom Left Zoom Center Zoom Right
20"
4'7" 3' 4'7"
Zoom Up