Aiphone JA-2MCD Intercom System User Manual


 
- 5 -
Wiring
Insert the wire into the terminal securely.
[1] Master monitor station JA-2MECD, JA-2MCD
[2] Sub monitor station JA-2HCD or Sub master station JA-2SD
(Audio only)
[3] Video door station JA-DAC
[4] Video or audio door station JA-DAC, JA-D
[5] Power supply +, (DC 24V)
[6] OPTION Door release EL-9S (12V AC 0.35A) or equivalent
Requires a separate AC transformer. Separately run a cable
for each audio/video and door release.
[7] OPTION Call extension speaker IER-2
[8] Impedance matching switch
Terminate the last sub station, putting SW to A position.
Otherwise both video image and audio quality will be
affected.
[9] Adaptor for Motion Detect Sensor & Camera (SOP available
in USA only)
[10] OPTION Use RY-3DL adaptor to connect 1~2 door releases
of other manufacture, rated more than EL-9S.
NP: Non-polarized P: Polarized
4-1
4-2
Options
1 Foot talk switch
Connect foot call switch (locally available) to PURPLE, BLUE
wires (dry contact closure).
2 Manual press-to-talk restriction
Short between PURPLE and GREEN wires to prevent manual
TALK button operation.
3 Local door release
Connects a local door release which has bigger contact
capacity than EL-9S. For two door releases, use an RY-3DL
adaptor (See Wiring diagram of RY-3DL on Page 4).
4 Video output to video apparatus, video printer, etc. (NTSC,
1Vp-p/75 ).
5 Two EL-9S door releases
Connect an EL-9S to BROWN & RED leads, which
corresponds to Door station 1. And, for door station 2, connect
the other EL-9S to ORANGE & YELLOW wires.
For JA-2HCD, only the functions No.1 & 2 are available.
Cut off unused wires to prevent shorting.
5
NAMES
5-1
Names (JA-2MECD)
[1] LCD (4 inch color)
[2] POWER Switch
[3] Speaker for chime & internal pre-tone/voice
[4] ABSENCE SET button
[5] PLAY button
[6] REC button
[7] Mic.
[8] Door call-in LED (red)
[9] PanTilt control pad
[10] MONITOR button
[11] Screen brightness control
[12] ROOM CALL button
[13] Transmit LED (red)
[14] Door release button
[15] TALK button
[16] VIDEO output (JA-2MECD only)
[17] Camera white light auto ON/OFF switch
[18] Active door call-in selector switch 1, 2 & 1&2
[19] Chime TONE volume control
L1
L1
L2
L2
#2
#1
E
+
b2
b1
V
-
V +
[2]
(BR)
(RD)
(OG)
(YE)
[5]
(RD)
(BR)
(OG)
(YE)
(GR)
(BL)
(PR)
[4]
[3]
[1]
#2
#1
JA-2MECD
JA-2MCD
JA-2HCD
#1
A1
A2
A1
A2
C1
C2
C1
C2
S
S
B1
B2
DC24V
EL-9S
1
EL-9S
2
JA-2MECD
[7]
[1]
[8]
[9]
[10]
[3]
[4]
[5]
[6]
[2]
[11]
[12]
[13]
[14]
[15]
[19]
[18]
[16]
[17]
DOOR
MONITOR
BRIGHT
CALL
SET
PLAY
REC
1
2
TALK
LH
SET SAVE
VIDEO OUT
DOOR
1 2
LIGHT
OFF AUTO
CALL
1&2
TONE
JA-2MECD