Aiphone IME-150 Intercom System User Manual


 
- 18 -
8
OPERATIONS
English
Operation
[1] Turn on the POWER switch of the main unit. The green lamp
illuminates to show that electricity is being supplied and the
system can be used.
[2] Turn on the TALK switch of the operation unit. The orange
lamp illuminates to show that communication is possible.
The voice from the customer side can be heard from the receive
speaker built in to the operation unit.
If a headset is connected, the receive sound is heard through
the speaker(s) in the headset. During transmission, direct your
voice towards the microphone of the headset.
When using a gooseneck microphone, you should direct your
voice towards the gooseneck microphone during transmission.
The VOX function is activated when the voice is output from the
operator to the speakers on the customer side. During this output,
the voice from the customer side is blocked. Be aware that
during transmission, priority is automatically given to the voice
from the operator side.
If a headset is connected, the receive sound is heard through
the speaker(s) in the headset. During transmission, direct your
voice towards the microphone of the headset.
[3] Change the VOL switch of the operation unit between HI and
LO as necessary. The orange LED illuminates when it is in the
HI position.
[4] If the PAGE switch is pressed during transmission, even if the
TALK switch is off, customers can be called or an
announcement can be broadcast via the paging speaker. The
orange LED illuminates while the button is pressed, and the
function is cancelled when the button is released.
[5] Turn off the TALK switch of the operation unit to switch to
standby mode. When switched to standby mode, the
transmission is blocked and the received sound volume is
reduced.
[6] When the system is not in use,press the POWER switch on the
main unit to turn off the system.
SPEAKER
HEADSET
MIC
[1] [2]
[2]
[3]
[2][5] [4]
[2]
[1][6]
MU-100
OU-100