Filter
Top Products
- 6 -
Calling security guard stations2-6
Doctor call2-5
OPTION button2-7
When the specified residence is called using Doctor call (automatic en-
try), the electric lock is automatically released without a door release op-
eration from the residential station.
This function may not be operated due to the equipment being used.
1 In the standby mode, press the security guard station call/light button.
Press the button once more to cancel the operation.
• When Doctor call function is set, the TONE OFF LED blinks every 2.5
seconds.
2 Press CALL button of the entrance station to unlock a door without a
door release operation from the residential station.
3 The residential station for which the Doctor call function is set is
called. Lift the handset to respond if necessary.
1 When the handset is picked up and the security guard station call/light
button is pressed, a call confirmation tone sounds.
• The TONE OFF LED will blink.
2 A tone will sound at the security guard station.
• The in use LED of the entrance station will light up.
Pressing the option button allows for operation of connected units to be
performed such as turning lights on and off.
NOTES: When Doctor call is enabled, the TONE OFF LED function cannot be
used. (It is possible to turn the call tone off.)
When calls are transferred to the security guard station, door release
with Doctor call is not possible.