- 7 -
:CANCEL
ENTER A LETTER
:CALL
ROOM NO. 101
SMITH
S
101
SMITH
S
7
R
Q
P
S
7
R
Q
P
S
7
R
Q
P
S
7
R
Q
P
S
ENTER A LETTER
:CANCEL
ENTER A LETTER
:CALL
...
Resident name (ex. "SMITH")
:CANCEL
ENTER A LETTER
:CALL
NO ENTRY
S
NO ENTRY : S
* If there is no relevant resident name, the message below is displayed.
(3) Display by using letters to search
1 In the standby mode, press [
] on the 10 key.
Call the residential station after it is displayed.
4 When the desired residential station is displayed, press the
button. The door call-in indicator will light up and you will hear a call tone.
Audio guidance will be heard depending on the settings.
2 When "ENTER A LETTER" displays, use the 10 key to enter letters.
3 The room number and name for the resident whose initial corresponds to the entered letter will display.
• Depending on the settings, the resident name may only display.
NOTES: 1. Pressing the or button for approximately 2 seconds will dis-
play the resident names in succession.
2. If both room number 111 and 1111 exist, the resident name for
room 111 will be displayed when 1, 1, 1 is entered, and the resident
name for room 1111 will be displayed if 1 is entered one more
time.
3. Stations can be made to display in order by room number using the
menu screen settings. (The order starts with the lowest digit from 0
to 9 and then the order goes by letter.) In cases where room num-
bers such as A101, A201, A901, A1001, and B101 exist, the order
starts with the lowest digit and goes in the order A101, A201, A901,
B101, A1001.
CALLING
SMITH
:CANCEL
CALLING
ROOM NO. 101
SMITH
WELCOME
WELCOME