Filter
Top Products
20
Profile Name: Define a recognizable profile name for you to identify the different network.
SSID: The SSID (up to 32 printable ASCII characters) is the unique name identified in a WLAN.
The ID prevents the unintentional merging of two co-located WLANs. You may specify a SSID
for the adapter and then only the device with the same SSID can interconnect to the adapter. If
you want to add the network nearby to the profile list, pull down the menu, the entire network
will be listed for you to add one of them to the profile list.
PSM (Power Saving Mode): The power saving function is only available when the network
type is in Infrastructure mode.
CAM (Constantly Awake Mode) – The adapter will always set in active mode.
PSM (Power Saving Mode) – Enable the adapter in the power saving mode when it is
idle.
Network Type:
Infrastructure – This operation mode requires the presence of a wireless Access Point.
All communication is done via the Access Point or Router.
802.11 Ad-Hoc – Select this mode if you want to connect to another wireless station in
the Wireless LAN network without through an Access Point or Router.
Tx Power: If you want to lower the transmit power of the adapter for saving the power of the
system, you can select the lower percentages from the list. The lower power will cause the
lower signal strength and the coverage range.
Ad Hoc Wireless Mode: When the card is set in Ad-Hoc (Peer-to-Peer Mode), you can
designate the wireless connection mode for the Ad-Hoc network.
802.11 B only – This adapter can be compatible with both 802.11g and 802.11b wireless