Aastra Telecom 9116LP Telephone User Manual


 
19
Advanced Features
Advanced Features
Clear Message Waiting
On occasion, the light indicator and the icon will stay on even though there are
no messages in your Voice Mail service. You can use the following procedures to clear
the display and the light indicator.
Set Area Code
The 9116LP allows you to save an up to three digit area code that will be stripped
when dialing a number from the Callers List. For example, if you enter your own area
code using this option, any Callers List entries with your same area code will be dialed
as a seven digit number, even though they will appear on the display with the area
code showing. For example, let’s assume your area code was 111, and you set this
area code using this option. Any number in the Callers List with the same 111 area
code would be dialed out from the Callers List as a seven digit number, without dial-
ing the area code. Note that the number would still appear in the Callers List and on
the display with the full number, but when dialed would appear on the first line of the
display screen as a seven digit number.
To turn a feature and light on or off:
1. Press the memory key where you stored the FeatureLight. The display shows
FTR LIGHT ON or FTR LIGHT OFF.
2. Lift the handset or press either D, P. The feature and light turn on
or off. (When the feature and light are on and you’re not using the telephone,
the display shows
Feature ON.
To clear Message Waiting indication:
1. Press I.
2. Use W or V until it indicates CLR MSG WAITING.
3. Press L.
To set the area code:
1. Press I.
2. Use W or V until it indicates SET AREA CODE.
3. Press K. Display indicates three positions - - -.
4. Use V and W to select a digit. Use T and U to move to the next position.
5. Press K.