Filter
Top Products
Model 57i IP Phone User Guide 47
Softkeys
Static and Softkey Settings for Park/Pickup
The IP phone has a park and pickup call feature that allows you to park a
call and pickup a call when required. There are two ways a user can
configure this feature:
• Using a static configuration
• Using a programmable configuration (using softkeys)
Note: The IP phone accepts both methods of configuration. However, to avoid
redundancy, Aastra Telecom recommends you configure either a static con-
figuration or a programmable configuration.
The IP phone supports the Park/Pickup feature on the Asterisk,
BroadWorks, Sylantro, and ININ PBX servers.
The following paragraphs describe the park and pickup methods of
configuration on the IP phones.
Park/Pickup Static Configuration
You can configure a static configuration for parking and picking up a call
using the Aastra Web UI at Basic Settings-> Preferences. By entering the
appropriate value in the "Park Call" and "Pickup Parked Call" fields, you
tell the phone where to park a live call and where to pickup the parked call.
On the IP phone UI, the static configuration method displays the following:
• When a call comes in, and you pickup the handset, the default label of
"Park" displays on the Phone UI.
• After pressing the "Park" softkey to park the call, the default label of
"Pickup" displays on the phone UI.
Note: On the 57i handset, pressing Ï displays the "Park" and "Pickup" labels.
The values you enter in the Aastra Web UI for the Park/Pickup call feature
are dependant on your type of server. The following table provides the
values you enter for the "Park Call" and "Pickup Parked Call" fields in the
Aastra Web UI.
Park/Pickup Call Server Configuration Values
*Leave "value" fields blank to disable the park and pickup feature.
Server Park Values* Pickup Values*
Aasterisk 700 700
Sylantro *98 *99
BroadWorks *68 *88
ININ PBX callpark pickup