Filter
Top Products
Issues Resolved in Release 1.4.1
50 41-001024-00, Rev 09, Release 1.4.1
IP Phone Release Notes 1.4.1
Issues Resolved in Release 1.4.1
Description
This section describes the issues resolved in release 1.4.1. The following table
provides the issue number and a brief description of each fix.
Note: Unless specifically indicated, these resolved issues apply to all
phone models.
Issue Number Description of Fix
CLN04606 With the 480i, the phone no longer hangs on startup when global call park and call
pickup keys are configured.
CLN04933 The IP phones no longer crash during transfers using BroadWorks release 1.2.
DEF04090 Phone no longer adds extra “/” in XML requests.
DEF04096 The cordless handsets now support sending DTMF events as INFO packets.
DEF04174 The message “No Service” no longer appears momentarily on the 480i during
registration. A parameter “sip registration renewal timer” has been added that allows
you to set the time, in seconds, prior to the expiration of when the registration is
renewed.
DEF04175 Ringing is no longer interrupted by the BLF ringing alert tone.
DEF04178 Added support for URI dialing to the 9133i programmable keys.
DEF04188 The Calls between the cordless handset and the base now get a voice path when
the call is not made using the intercom function.
DEF04210 When the media port is equal to 0 in the INVITE, the phone no longer sends “486
Busy Here” after sending “180 Ringing when using a MetaSwtich.
DEF04234 The IP phones no longer reject calls when receiving an attribute in SDP that it didn’t
recognize. It now correctly ignores those attributes. This fixes an issue with the
Eyebeam soft client.
DEF04302 You can now toggle to handsfree while on hold.
DEF04450 When using the Aastra Web UI, the dial plan no longer truncates at 85 characters.
DEF04545 The hangup key now returns dialtone when the handset stays off hook. With the 480i
CT, the ykey now acts consistently across all phones.