Aastra Telecom 480E Telephone User Manual


 
14
Model 1 User Guide
Headset/ Dataport Operation
Headset/ Dataport
Operation
Using a Headset with your
Telephone
The Model 1 is equipped to
accept headsets with either a
modular RJ22 jack or a 2.5mm
standard jack. Headsets with a
modular RJ22 jack can be connected
to the phone by using the jack on
the back of the set. Headsets with a
standard 2.5mm jack can be
plugged into the headset jack
located on the left hand side of the
telephone.
Contact your telephone equipment
retailer or distributor to purchase a
headset. Customers should read
and observe all safety
recommendations contained in
headset operating guides when
using any headset.
Making and Receiving Calls
using a Headset
1. Ensure that you have selected a
headset audio mode by access-
ing the Options menu. See the
section "Customizing your
phone" for detailed informa-
tion.
2. Plug the headset into jack.
3. Press the d
/f key to obtain
dialtone or answer an incoming
call. Depending on the audio
mode selected from the
Options menu, dialtone or an
incoming call will be received
on either the headset or the
handsfree speakerphone.
4. Press the k key to end
the call.
Using the Dataport
Located on the right hand side of
the Model
1, the dataport can be
used to connect another device such
as a fax machine or computer
modem to the phone. Plug one end
of a line cord to the phone and the
other end to the device to be
connected.
Note: The dataport will only oper-
ate when the handset is on
hook (in the phone base cra-
dle).
Handset cord jack
H
eadset cord jack
Phone cord jack
D0041-0049-00 E 480e.book Page 14 Wednesday, June 11, 2003 4:25 PM