Filter
Top Products
18
Covad Confidential
12. Configure the NTP Server Address for the phone by using the following command sequence.
Click the “Settings” button on the phone
Press the (4) button, or move cursor to “4. Time Configuration” using [Next]/[Prev] soft keys, and
press the [OK ] soft key.
Press the (1) button, or move cursor to “1. NTP Server Address” using [Next]/[Prev] soft keys, and
press the [OK ] soft key.
Input the NTP Server address using the keypad
- 64.2.21.49
- Press the asterisk (‘*’) button to input dot (‘.’).
- Press [Clr ] soft key to delete all characters.
-Press [ß] soft key to delete the character in front of cursor.
- The [Mode] soft key, switches the keypad entry mode: number ([1]), upper case ([A]),
lower case ([a]) or special character ([S]) mode.
Press the [OK] softkey
13. After entry of certain configuration settings, the LIP-6812 will require a reboot to move the
settings to active memory. These settings include the following:
Network Configuration settings
Call Server Address settings
DSS Registration settings
Software Update settings
Default settings
LG IP Phone Configuration – Manual Method