1. Manuals
  2. Communications Support
  3. Avaya Support
  4. Telephone Support
Support User Manuals
Question About Avaya Telephone None
How do I replace system battery w/power on?...

How do I replace system battery w/power on?

Asked by Somer on 07/02/2014 1  Answer

ManualsOnline posted an answer 10 years, 3 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here

Victor posted an answer 10 years, 2 months ago

0 Which system? Avaya makes Merlin, Merlin Magix, Partner, Gateways, IP Offices. If this is for an Avaya Partner - which I believe if station 10 is displaying ChgBat W/PowerOn or ReplaceSysBat W/Power On. CAUTION: Do not turn off the power or remove the processor module before replacing the batteries! If you do, all settings for system and telephone programming revert to the factory settings. If you have a Backup/Restore PC Card, do a backup before changing the batteries. Follow these steps to insert the batteries: 1) Locate the battery compartment at the bottom of the PARTNER ACS processor module, below the extension jacks. 2) Push gently on the battery icon (the locking latch) and slide the battery icon up to cover the plus icon; this unlocks the battery assembly. 3) Remove the battery assembly by gently pulling the tab at the bottom of the battery compartment cover. 4) Insert two new AAA-size standard alkaline batteries into the metal battery clips by pushing them straight in, placing the negative (–) end of one battery into the bottom clip and the positive (+) end of the other battery into the top clip. 5) With the locking latch in the unlocked position (battery icon and “minus” icon visible), slide the battery assembly into the processor module along the battery guides on the inside of the battery compartment. Push the battery assembly in far enough that the edges of the assembly slip behind the plastic housing of the processor module. 6) Pressing lightly on the battery icon on the front of the battery assembly, slide the locking latch downward to secure the assembly in place. The “plus” icon and the battery icon should now be visible on the front of the battery assembly.
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.
Ask a Question Request a Manual