Filter
Top Products
22 Dell PowerApp 100 Appliances Rack Installation Guide
Figure 18. Installing the Computer in the Rack
5. Press in on the release latch on each extended slide and push the chassis into the
rack.
6. Tighten the captive thumbscrews on each side of the front chassis panel to
secure the system to the rack.
Installing the Cable-Management Arm
To install the cable-management arm on the back of the computer, perform the follow-
ing steps:
1. Facing the back of the rack cabinet, locate the threaded hole on the back of the
slide assembly and secure the end of the cable-management arm (the end having
a bracket and captive thumbscrew) to the right side vertical rail (see Figure19).
The bracket snaps into the square mounting holes on the vertical rail and is
secured with a captive thumbscrew.
inner rail
captive thumbscrews (2)