Filter
Top Products
12 Dell PowerApp 100 Appliances Rack Installation Guide
Figure 9. Four-Post Rack Kit Contents
Before You Begin
Before you begin installing your PowerApp system in the rack, carefully read “Safety
Instructions,” found earlier in this guide.
NOTICE: This rack kit is intended to be installed in a Dell rack by trained
service technicians. If you install the kit in any other rack, be sure that the
rack meets the specifications of American National Standards Institute
(ANSI)/Electronic Industries Association (EIA) standard ANSI/EIA-310-D-92,
International Electrotechnical Commission (IEC) 297, and Deutsche Indus-
trie Norm (DIN) 41494. One rack kit is required for each Dell server or
storage system that is installed in a rack.
cable-management arm assembly
slide assemblies with
mounting brackets (1 pair)
10-32 x 0.5-inch
pan-head Phillips
screws (4)
1-U template
10-24 x 0.375-
inch pan-head
Phillips screws (6)