Open as PDF
Call Tone Transmission
If you want to contact someone in your
party, press the call button. ”CALL” and
the transmit icon appear on the LCD for
2 seconds. Anyone on the same channel
and the same CTCSS code will be alerted
with your Call Tone.
A tone sounds when any button is pressed. This is the initial default setting.
This function may be silenced if you wish. To silence the tones, press and hold the MON
button while you turn on the radio. If you want to hear the tones again, press and hold the
MON button while you turn on the radio. When the radio is turned off and then on again,
the last selected setting remains.
The LCD display can be illuminated to assist your viewing. Press the light/lock button to
turn on the display backlight. The light goes off automatically after 5 seconds.
External Microphone and Speaker (Optional)
Available as an optional accessory. Use only an original Uniden speaker/microphone.
Use of any other speaker/microphone may void your warranty.
To purchase your external accessory, contact your local Uniden dealer or call Customer
Service at (800) 297-1023 Monday through Friday, 7:00 a.m. to 7:00 p.m. Central time.
This function will also silence call tones and error tones.
FRS500(166x125).qxd 7/25/00 18:20 Page 12