Uniden CEZ200 Telephone User Manual


  Open as PDF
of 2
 
Fold
line
Fold
line
Fold
line
Fold
line
Changes or modications to this product not expressly approved by Uniden, or operation
of this product in any way other than as detailed by the owner’s manual, could void your
authority to operate this product.
Industry Canada (I.C.) Notice
Terminal equipment
NOTICE:This equipment meets the applicable Industry Canada Terminal Equipment Technical
Specications. This is conrmed by the registration number. The abbreviation, IC, before
the registration number signies that registration was performed based on a Declaration of
Conformity indicating that Industry Canada technical specications were met. It does not
imply that Industry Canada approved the equipment.
NOTICE:The Ringer Equivalence Number (REN) for this terminal equipment is marked on the
equipment itself. The REN assigned to each terminal equipment provides an indication of
the maximum number of terminals allowed to be connected to a telephone interface. The
termination on an interface may consist of any combination of devices subject only to the
requirement that the sum of the Ringer Equivalence Numbers of all the devices does not
exceed 5.
One-year Limited Warranty
Important: Evidence of original purchase is required for warranty service. WARRANTOR:
UNIDEN AMERICA CORPORATION ("Uniden") ELEMENTS OF WARRANTY: Uniden warrants,
for one year, to the original retail owner, this Uniden Product to be free from defects in
materials and craftsmanship with only the limitations or exclusions set out below.
WARRANTY DURATION: This warranty to the original user shall terminate and be of no
further eect 12 months after the date of original retail sale. The warranty is invalid if
the Product is (A) damaged or not maintained as reasonable or necessary, (B) modied,
altered, or used as part of any conversion kits, subassemblies, or any congurations not
sold by Uniden, (C) improperly installed, (D) serviced or repaired by someone other than an
authorized Uniden service center for a defect or malfunction covered by this warranty, (E)
used in any conjunction with equipment or parts or as part of any system not manufactured
by Uniden, or (F) installed or programmed by anyone other than as detailed by the owner's
manual for this product.
STATEMENT OF REMEDY: In the event that the product does not conform to this warranty
at any time while this warranty is in eect, warrantor will either, at its option, repair or
replace the defective unit and return it to you without charge for parts, service, or any
other cost (except shipping and handling) incurred by warrantor or its representatives in
connection with the performance of this warranty. Warrantor, at its option, may replace the
unit with a new or refurbished unit. THE LIMITED WARRANTY SET FORTH ABOVE IS THE SOLE
AND ENTIRE WARRANTY PERTAINING TO THE PRODUCT AND IS IN LIEU OF AND EXCLUDES
ALL OTHER WARRANTIES OF ANY NATURE WHATSOEVER, WHETHER EXPRESS, IMPLIED OR
ARISING BY OPERATION OF LAW, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTIES
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS WARRANTY DOES
NOT COVER OR PROVIDE FOR THE REIMBURSEMENT OR PAYMENT OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES. Some states do not allow this exclusion or limitation of
incidental or consequential damages so the above limitation or exclusion may not apply to
you.
LEGAL REMEDIES: This warranty gives you specic legal rights, and you may also have other
rights which vary from state to state. This warranty is void outside the United States of
America and Canada.
PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after following the
instructions in the owner's manual you are certain that the Product is defective, pack the
Product carefully (preferably in its original packaging). The Product should include all parts
and accessories originally packaged with the Product. Include evidence of original purchase
and a note describing the defect that has caused you to return it. The Product should be
shipped freight prepaid, by traceable means, to warrantor at:
Uniden America Corporation
Service Department
4700 Amon Carter Blvd.
Fort Worth, TX 76155
Trimline Phone User's Guide
What's in the box?
If any items are missing
or damaged, contact
our Customer Care Line
immediately. Never use
damaged products.
Need Help? You can get
answers 24/7 at our
website: www.uniden.com.
If You... Contact Uniden’s... Phone
have a question or problem Customer Care Line* 800-297-1023
need a part or accessory Parts Department* 800-554-3988
need special assistance due
to a disability
Accessibility Help Line
800-874-9314
(voice or TTY)
* During regular business hours, Central Standard Time. Visit our website for detailed
business hours.
Important safety precautions
When using your telephone equipment, always follow basic safety
precautions to reduce the risk of re, electric shock and injury to
persons, including the following:
Do not use this product near water, for example, near a bath tub,
wash bowl, kitchen sink or laundry tub, in a wet basement or near a
swimming pool.
Avoid using a telephone (other than a cordless type) during an electrical
storm. There may be a remote risk of electric shock from lightning.
Do not use the telephone to report a gas leak in the vicinity of the leak.
SAVE THESE INSTRUCTIONS
Uniden works to reduce lead content in our PVC coated cords in our products and
accessories.
Warning! The cords on this product and/or accessories contain lead,
a chemical known to the State of California to cause birth defects or
other reproductive harm. Wash hands after handling.
Uniden® is a registered trademark of Uniden America Corporation.
The pictures in this manual are used for examples only. Your actual phone may not look
exactly like the pictures.
►
►
►
Connecting the Phone
Test the connection
Pick up the handset and listen for a dial tone. If you don't hear
one, check the connection between the base and the phone jack.
Make a test call. If the dial won't stop when you dial, check the
Tone/pulse switch: if it’s on tone, change it to pulse, and vice
versa. Try your test call again.
If there is static or noise on the line, see the section on Solving
Problems.
1)
2)
Use the coiled cord to
connect the handset
to the base (use the
jack marked with the
handset icon).
Use the telephone
cord to connect the
line jack to a standard
telephone wall jack.
Route the
cord through
the channel.
Route the
cord through
the channel.
Use the coiled cord to
connect the handset
to the base (use the
jack marked with the
handset icon).
Use the telephone
cord to connect the
line jack to a standard
telephone wall jack.
Route the
cord through
the channel.
Route the
cord through
the channel.
Base
Telephone
cord
Coiled
handset cord
Handset
Front (top panel)Back (bottom panel)Folded inside
Page 1 (outside)