Southwestern Bell FM2575 Answering Machine User Manual


 
2. While the display is in standby mode,
(Rotate the "REVIEW" knob to the
middle position, until there are no Caller
ID records displayed) press and hold the
"ERASE" Button for 2 seconds. The
LCD will show:
3. Press the "ERASE" Button again;
ALL VIEWED messages will be erased.
NOTE:
1. If there are messages that have not
been reviewed, the "Erase All Calls"
function cannot be performed.
2. VIP (Priority) calls will not be
erased when you erase all calls. See
VIP CALLS section for details.
3. Press "ERASE" Button again; the
CID will be erased and the LCD will
display the next call message.
To Erase All Calls
1. Rotate the "REVIEW" knob to
review the Caller ID records received
before erasing all calls.
Caller ID Features (Cont.)
Caller ID Features (Cont.)
22
To Create a VIP Call:
1. Rotate the "REVIEW" knob to view the
caller ID information you received.
2. Press and hold "CALL BACK" Button
for 2 seconds until the "VIP" icon is
displayed.
To Remove a VIP Call:
1. Rotate the "REVIEW" knob to display
the call you have marked "VIP".
2. Press and hold "CALL BACK"
Button for 2 seconds. The "VIP"
icon will disappear.
VIP
NEW
CALL
AM
NEW
CALL
AM
VIP
NEW
CALL
AM
23
1. 7 digits without a 1 : Assuming that
you have programmed your correct area
code, redial your local call by pressing
the "CALL BACK" Button once.
.
2. 7 digits with a 1 : Assuming that you
have programmed your correct area code,
scroll to the local 7 digit call you wish to
redial. Simply press the "CALL BACK"
Button twice.
3. 10 digits without a 1 : Due to the
software setup of the FM2575, the user
is instructed to insert their 3 digit local
area code. In some areas of the country,
one must include their area code when
making a local call. To solve this issue,
the user must reprogram their FM2575
to another 3 digit "fictitious" area code.
.
.
If you have priority calls in memory,
the display will show "CALL XX"
when all other calls have been erased.
VIP (Priority) Calls
The FM2575 allows you to create VIP
(priority) call records. When a VIP
(priority) call is received, the new call
LED will flash 4 times each time the
phone rings, to alert you this is a VIP
(priority) call.
NOTE: When the incoming VIP call is a
call waiting Caller ID call, NEW CALL
LED will flash 4 times every 6 seconds
until the call disappeared.
Caller ID Redial
The FM2575 allows you to redial a
phone number stored in the Caller ID
memory by pressing the "CALL BACK"
Button while reviewing a call record.
To redial a call record, follow these
steps:
NEW
CALL
AM
.
.
.
.
1. Rotate the "REVIEW" knob to
select the Caller ID number that you
want to dial.
2. Press and release the "CALL BACK"
Button. The number will scroll across
the screen from right to left as it is dialed,
and the speakerphone will automatically
be turned on.
3. After the tones have stopped and a
connection has been made, lift the
handset or just speak.
With current Telecom redialing situations,
there are 4 redial options: (1) 7 digits
without a 1 prefix; (2) 7 digits with a 1
prefix; (3) 10 digits without a 1 prefix;
and (4) 10 digits with a 1 prefix.
We recommend using an area code not
currently being used in the U.S. (i.e. 100,
etc.) Once your area code is
programmed as above, your FM2575
will show all "10 digits" for every
incoming call. To redial a local 10 digit
call, press the "CALL BACK" Button
twice in succession. The "1" prefix is
then omitted and the local 10 digit call is
redialed out.
4. 10 digits with a 1 prefix: Simply
scroll to the desired Long Distance 10
digit call you wish to dial out. Press
down the "CALL BACK" button once
and release. If your area requires that
you add 1 and your area code even if the
call is within the same area code, then
you must reprogram your FM2575 to
another 3-digit "fictitious" area code.
The "1" prefix will be added before the
10 digit number and your long distance
call will be dialed out.
Note: Use caution when pressing the
CALL BACK button. Press and release
rapidly; if the CALL BACK button is
held down too long, the "VIP" feature
will be activated.
IF THE CALLER ID RECORD
DISPLAYS "PRIVATE CALL" OR
"OUT OF AREA", THE REDIAL
FUNCTION WILL NOT WORK FOR
THAT PARTICULAR RECORD.
.
.
Caller ID Erase
To Erase a Single Call
1. Rotate the "REVIEW" knob to review
the Caller ID records you received.
2. Press "ERASE" Button to erase
the call displayed; the LCD will
show "ERASE?".
NEW
CALL
AM