Sony SPP-A2470 Cordless Telephone User Manual


 
Getting Started
16
US
4 Select the number (”#1“ to ”#5“) to enter the local area code
by turning Jog Dial.
5 Press Jog Dial.
”ENTER AREA CODE“ appears on the display.
6 Enter the three digits of the local area code using the dialing
keys.
7 Press (PGM).
You hear a long confirmation beep.
Notes
If the local area code is already entered, it appears on the display in step 4. To
enter a different local area code, see “To change the local area code” below.
Do not allow more than 20 seconds to elapse during the operation procedure.
Tips
You may press Jog Dial instead of (PGM) in step 7.
To check the current local area code, perform steps 1 to 4. The local area code
appears on the display for about 20 seconds.
To change the local area code
1 Perform steps 1 to 5 on pages 15 to 16.
The current local area code appears on the display.
2 Turn Jog Dial down to erase the current local area code.
3 Enter a new local area code using the dialing keys.
4 Press (PGM).
You hear a long confirmation beep.
To erase the local area code
You can erase the local area code. Perform steps 1 and 2 above, then
press (PGM).
The local area code will be erased, and you hear a long confirmation
beep.
Step 4: Entering the area code (continued)