Sony P C V- R Z s e r i e s / P C V - 1 1 2 6 Telephone User Manual


 
Sony VAIO Desktop User Guide
Getting help
78
nN
The message 'Press <F1> to continue, <F2> to enter setup' appears at startup
This message is telling you to initialise the BIOS (Basic Input/Output System).
To do so, proceed as follows:
1 Turn off the computer.
2 Remove any peripheral devices connected to the computer.
3 Turn on the computer and press <F2> when the Sony logo appears.
The BIOS setup menu screen appears.
4 Use the keyboard’s arrow keys to select the Exit menu.
5 Press <F5> or use the arrow keys to select Load Setup Defaults and then press <Enter>.
The message Load Setup Defaults? appears.
6 Make sure that Yes is selected and then press <Enter>.
7 Press <F10> to exit, or use the arrow keys to select Save Changes and then press <Enter>.
The message Save configuration changes and exit now? appears.
8 Make sure that Yes is selected and then press <Enter>.