Sony CM-Z100SPR Telephone User Manual


 
outlet and the ringer volume is set to “vibration,”
the phone emits an audible ring at the “high”
setting.
22: Mute/Unmute Access this feature when you are on a call and
need to switch the microphone on or off.
When the microphone is muted, the other
party cannot hear you. You can also mute or
unmute the microphone during a call by
pressing and holding the dial.
23: Key Beep This adjusts the volume of the beep you hear
Volume
when keys are pressed. You can select “off,”
“low,” “medium” and “high.”
24: Earpiece Use this feature to adjust the earpiece volume.
Volume
You can also adjust the earpiece volume during
a call by turning the dial.
25: Ringer Type Use this feature to change the sound of your
phone’s ring. As you turn the dial to scroll
through the five possible settings, your phone
will play the ringer options for you.
26: Key Sound This adjusts the sound your phone makes
when you press a key. Your options are
“tones” and “clicks”. The other party will hear
44
tones if you press the keys during a call,
even if you select “clicks.”
27: Key Beep You can set the length of the beep that sounds
Length
when you press a key. Your options are
“standard” and “long.” The key beep length
may be important if you use your phone to
pick up messages from your home answering
machine or to access automated phone systems.
This setting affects both the key beep and touch-
tone signals (see page 39).
28: Message Ring This setting determines how you will be
notified that you have a new message. If you
select “on,” an alert sounds when you receive
a new message. If you select “+ reminder,” a
beep will sound every two minutes to remind
you that you have an unread message. If you
select “off,” beeps will not sound when you
receive new messages. If Ring Volume is set to
“vibration,” the phone will vibrate rather than
ring when a new message is received.
45