Sony CD145 Cordless Telephone User Manual


 
Getting started
16
press , ,enter 4-digit PIN
code (default PIN is 0000) and
press in idle mode to its
default settings.The handset
will go back to country code
selection screen and you can
select the country code again.If
country selection is not
needed, the handset will go
back to idle screen after reset.
3.5
Register your handset
You will need to register your
new handset or if you wish to
register the handset to a
different base unit.You can
register up to four handsets on
a single base station.
Before entering the 4-digit PIN,
press on the base unit for
around three seconds when
the base is in standby mode.
Press ,
Enter the default or
existing 4-digit PIN code.
(Default PIN is 0000)
Press to start registration
Note
If the PIN code you entered is
incorrect, a long beep is
emitted and the phone returns
to standby mode.
3
2
1
4 Using your
phone
4.1 Make a call
4.1.1 Predialling
Enter the phone number
(maximum 24 digits)
Press to dial the number
The call is initiated.
4.1.2 Direct dialling
Press to take the line
Enter the phone number
The call is initiated.
4.1.3 Call from the call
log
This feature is available if you
have subscribed the Caller Line
Identification service (CLI) with
your network provider.
Press to show the
latest call log entry
Press repeatedly to
scroll through the list of
unanswered calls to select
your desired unanswered
call
Press to dial the
selected number
3
2
1
2
1
2
1