Sony BDV-E2100 Bluetooth Headset User Manual


 
21
US
BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100
4-446-733-11(1)
D:\NORM'S JOB\SONY HA\SO120029\BDV-
E6100_4100_3100_E2100\4446733111_US (U2)\040GET.fm
masterpage: Right
Getting Started
• Be sure to fully extend the FM wire antenna
(aerial).
• After connecting the FM wire antenna (aerial),
keep it as horizontal as possible.
Step 3: Preparing for
Network Connection
To connect the system to your network, perform
[Easy Network Settings]. For details, see “Step 4:
Performing the Easy Setup” (page 23).
Select the method based on your LAN
(Local Area Network) environment.
If you use a wireless LAN
The system has built-in Wi-Fi, and you
can connect the system to the network by
making the network settings.
If you use other than a wireless LAN
Use a LAN cable to connect to the LAN
(100) terminal on the unit.
A shielded interface cable (LAN cable), straight
or crossover, is recommended.
Connecting the antenna
(aerial)
Note
FM wire antenna (aerial)
(supplied)
Tip
Tip
Broadband router
LAN cable (not supplied)