Sony 8000 Telephone User Manual


 
Getting to know your OpenStage phone
20
Secondary line
The secondary line on your phone is used as a primary line by another sub-
scriber in the LAN. Your primary line, which is configured on another tele-
phone in the LAN, simultaneously functions as the secondary line on that
telephone.
Phantom line
Phantom lines are not used as primary lines by any telephones in the LAN.
Phantom lines are established when the number of lines provided by a
communications system exceeds the number of available telephones.
Line utilization
Private line: A line that is used by a single telephone. This line cannot
be used as a secondary line by another telephone.
Shared line: A line that is configured on multiple telephones. The line
status (if configured) is displayed in the line overview for all telephones
that share this line. If, for example, a shared line is being used by a tele-
phone, a status message indicating that this line is busy is displayed on
all other telephones.
The line status is indicated by the LED in addition to the display in the line
overview Æ page 28.
LED display
LED Explanation
S
Not lit: The phone is in idle mode.
T
Flashing:
Incoming call on the line (Æ page 79)
"Hold reminder" is activated (Æ page 61)
Flickering:
Outgoing call on the line
The incoming call was prioritized and selected via the "Au-
tomatic line selection for incoming calls"
Fast blinking: The line is on "Hold".
Blinking: Call forwarding is activated
R
Illuminated: The line is busy