Silicon Laboratories C8051F345 Two-Way Radio User Manual


 
Rev. 0.5 159
C8051F340/1/2/3/4/5/6/7
SFR Definition 15.16. P3: Port3 Latch
SFR Definition 15.17. P3MDIN: Port3 Input Mode
SFR Definition 15.18. P3MDOUT: Port3 Output Mode
Bits7–0: P3.[7:0]
Write - Output appears on I/O pins.
0: Logic Low Output.
1: Logic High Output (high impedance if corresponding P3MDOUT.n bit = 0).
Read - Always reads ‘0’ if selected as analog input in register P3MDIN. Directly reads Port
pin when configured as digital input.
0: P3.n pin is logic low.
1: P3.n pin is logic high.
Note: P3.1–3.7 are only available on 48-pin devices.
R/W R/W R/W R/W R/W R/W R/W R/W Reset Value
P3.7 P3.6 P3.5 P3.4 P3.3 P3.2 P3.1 P3.0 11111111
Bit7 Bit6 Bit5 Bit4 Bit3 Bit2 Bit1 Bit0 SFR Address:
(bit addressable)
0xB0
Bits7–0: Analog Input Configuration Bits for P3.7–P3.0 (respectively).
Port pins configured as analog inputs have their weak pull-up, digital driver, and digital
receiver disabled.
0: Corresponding P3.n pin is configured as an analog input.
1: Corresponding P3.n pin is not configured as an analog input.
Note: P3.1–3.7 are only available on 48-pin devices.
R/W R/W R/W R/W R/W R/W R/W R/W Reset Value
11111111
Bit7 Bit6 Bit5 Bit4 Bit3 Bit2 Bit1 Bit0 SFR Address:
0xF4
Bits7–0: Output Configuration Bits for P3.7–P3.0 (respectively); ignored if corresponding bit in regis-
ter P3MDIN is logic 0.
0: Corresponding P3.n Output is open-drain.
1: Corresponding P3.n Output is push-pull.
Note: P3.1–3.7 are only available on 48-pin devices.
R/W R/W R/W R/W R/W R/W R/W R/W Reset Value
00000000
Bit7 Bit6 Bit5 Bit4 Bit3 Bit2 Bit1 Bit0 SFR Address:
0xA7