Filter
Top Products
C8051F340/1/2/3/4/5/6/7
238 Rev. 0.5
SFR Definition 20.3. SPI0CKR: SPI0 Clock Rate
SFR Definition 20.4. SPI0DAT: SPI0 Data
Bits 7–0: SCR7–SCR0: SPI0 Clock Rate.
These bits determine the frequency of the SCK output when the SPI0 module is configured
for master mode operation. The SCK clock frequency is a divided version of the system
clock, and is given in the following equation, where
SYSCLK is the system clock frequency
and
SPI0CKR is the 8-bit value held in the SPI0CKR register.
for 0 <= SPI0CKR <= 255
Example: If SYSCLK = 2 MHz and SPI0CKR = 0x04,
R/W R/W R/W R/W R/W R/W R/W R/W Reset Value
SCR7 SCR6 SCR5 SCR4 SCR3 SCR2 SCR1 SCR0 00000000
Bit7 Bit6 Bit5 Bit4 Bit3 Bit2 Bit1 Bit0
SFR Address: 0xA2
f
SCK
2000000
241+()×
--------------------------
=
f
SCK
200kHz=
f
SCK
SYSCLK
2 SPI0CKR 1+()×
-------------------------------------------------
=
Bits 7–0: SPI0DAT: SPI0 Transmit and Receive Data.
The SPI0DAT register is used to transmit and receive SPI0 data. Writing data to SPI0DAT
places the data into the transmit buffer and initiates a transfer when in Master Mode. A read
of SPI0DAT returns the contents of the receive buffer.
R/W R/W R/W R/W R/W R/W R/W R/W Reset Value
00000000
Bit7 Bit6 Bit5 Bit4 Bit3 Bit2 Bit1 Bit0
SFR Address: 0xA3