Filter
Top Products
C8051F340/1/2/3/4/5/6/7
168 Rev. 0.5
SFR Definition 16.3. USB0DAT: USB0 Data
This SFR is used to indirectly read and write USB0 registers.
Write Procedure:
1. Poll for BUSY (USB 0ADR.7) => ‘0’.
2. Load the target USB0 register address into the USBADDR bits in register USB0ADR.
3. Write data to USB0DAT.
4. Repeat (Step 2 may be skipped when writing to the same USB0 register).
Read Procedure:
1. Poll for BUSY (USB 0ADR.7) => ‘0’.
2. Load the target USB0 register address into the USBADDR bits in register USB0ADR.
3. Write ‘1’ to the BUSY bit in register USB0ADR (steps 2 and 3 can be performed in the
same write).
4. Poll for BUSY (USB 0ADR.7) => ‘0’.
5. Read data from USB0DAT.
6. Repeat from Step 2 (Step 2 may be skipped when reading the same USB0 register; Step 3
may be skipped when the AUTORD bit (USB0ADR.6) is logic 1).
R/W R/W R/W R/W R/W R/W R/W R/W Reset Value
USB0DAT 00000000
Bit7 Bit6 Bit5 Bit4 Bit3 Bit2 Bit1 Bit0 SFR Address:
0x97