Silicon Laboratories C8051F341 Two-Way Radio User Manual


 
Rev. 0.5 163
C8051F340/1/2/3/4/5/6/7
16. Universal Serial Bus Controller (USB0)
C8051F340/1/2/3/4/5/6/7 devices include a complete Full/Low Speed USB function for USB peripheral
implementations*. The USB Function Controller (USB0) consists of a Serial Interface Engine (SIE), USB
Transceiver (including matching resistors and configurable pull-up resistors), 1k FIFO block, and clock
recovery mechanism for crystal-less operation. No external components are required. The USB Function
Controller and Transceiver is Universal Serial Bus Specification 2.0 compliant.
Figure 16.1. USB0 Block Diagram
Important Note: This document assumes a comprehensive understanding of the USB
Protocol. Terms and abbreviations used in this document are defined in the USB Specifi-
cation. We encourage you to review the latest version of the USB Specification before pro-
ceeding.
*Note: The C8051F340/1/2/3/4/5/6/7 cannot be used as a USB Host device.
Transceiver Serial Interface Engine (SIE)
USB FIFOs
(1k RAM)
D+
D-
VDD
Endpoint0
IN/OUT
Endpoint1
IN OUT
Endpoint2
IN OUT
Endpoint3
IN OUT
Data
Transfer
Control
CIP-51 Core
USB
Control,
Status, and
Interrupt
Registers