Filter
Top Products
Settings
138
Receiving data via Bluetooth
To receive data via Bluetooth, your phone’s Bluetooth feature must be
active. If an unauthorized Bluetooth device sends data to your phone,
the phone displays a confirmation message. To receive data, press
the Yes soft key.
Security
The Security menu (Menu 9.7) enables you to restrict the use of your
phone to others and the types of calls.Various codes and passwords
are used to protect the features of your phone. They are described in
the following sections. Also see “Access Codes” on page 142.
PIN check
When the PIN check feature is enabled, you must enter your PIN each
time you switch the phone on. Consequently, any person who does
not have your PIN cannot use your phone without your approval.
Note: Before disabling the PIN Check feature, you must enter your PIN.
The following options are available:
♦Disable: the phone connects directly to the network when you
switch it on.
♦Enable: you must enter the PIN each time the phone is switched
on.
Change PIN
This feature allows you to change your current PIN to a new one,
provided that the PIN Check feature is enabled. You must enter the
current PIN before you can specify a new one. Once you have entered
a new PIN, you are asked to confirm it by entering it again.