Samsung GH68-15049A Bluetooth Headset User Manual


 
Guide No.: GH68-15049A
07/2007. Rev. 1.1
Quick Start Guide
Bluetooth Mono Headset
WEP500
Thank you for purchasing the Samsung Bluetooth
Mono Headset WEP500. We hope you will be
delighted with its operation.
Take a moment before you get started to
familiarize yourself with your new headset.
Make sure you have the following items with your
headset:
Make sure you have the following items with your
headset:
Check the accessoriesCheck the accessories
Charge your headsetCharge your headset
Charge the headset's battery fully before using
the headset for the first time.
1
Put the headset in the supplied headset
cradle and close the cover.
2
Plug the adapter into the headset cradle’s
socket.
3
Plug the adapter into the electrical outlet.
4
Remove the adapter from the headset cradle.
• Charge the headset until the red light on the
headset turns to blue.
• The headset will be fully charged in
approximately 2 hours.
Before you can use your headset, you must pair it
with your phone.
Put your headset in
pairing mode
Turn on Bluetooth on your
phone and pair with headset
Test and use
Using your WEP500
See Features and Functions Guide
on the reverse side of this guide
for information on using your
WEP500.
• If you turn on the headset for the first time, it
proceeds into pairing mode immediately.
• If you have paired the headset with other Bluetooth
devices, make sure that the headset is off (see Turn
headset on/off on the reverse side of this guide).
Then press and hold the Multi-Function button until
the indicator light turns solid blue after blinking.
Before using your headset
Multi-Function
button
Earpiece
Secondary
microphone
Volume Up
button
NOTE:
The headset is not able to operate while charging.
Try to reconnect
after charging is completed.
NOTE:
Your headset supports the Headset and/or Hands-Free
Profile(s).
Start here
Charge your headset
Put your headset in pairing mode
Turn on Bluetooth on your phone and
pair with headset
Test and use
Get connected in 4 quick steps
Headquarters:
1301 East Lookout Drive Suite 150
Richardson, TX 75082
Internet Address:
http://www.samsungmobileusa.com/
accessories
Customer Care Center:
1-888-987-4357
Volume Down
button
Primary
microphone
Indicator light
Charging contact
Headset cradle, Adapter, User’s Guide,
3 Earpiece Covers (Large, Medium, Small)
Headset cradle, Adapter, User’s Guide,
3 Earpiece Covers (Large, Medium, Small)
1
Set your Bluetooth phone to discover the
headset by following your phone's user guide.
Typically, the steps involve going to the Settings
,
Connection, or Bluetooth menu on your
phone and then selecting the option to discover
Bluetooth devices.
Your phone will find the Samsung WEP500
headset.
2
Select Samsung WEP500.
3
When the phone asks if you want to pair with it,
confirm by selecting Yes or OK.
4
Enter the headset passkey or PIN, 0000.
Your phone and headset are now paired and
ready to make and receive calls. To confirm
they are operating properly, make a call:
1
Place the headset over your ear.
See Wear the headset on the reverse
side of this guide.
2
On your phone, make a call to the number
you want.
3
If your phone and headset are successfully
paired, you will hear ringing on the headset.
After you have successfully paired your phone
and headset, you do not need to repeat these
initial setup steps each time you use the
headset.