Radio Shack TAD-739 Answering Machine User Manual


 
14
To play only new messages, hold down
the desired
PLAY
button for 2 seconds.
The TAD tells you how many new mes-
sages you have in that line and plays
them.
After all messages play, the TAD says,
“End of messages.”
To replay a message during playback,
press
REPEAT
. The current message
starts again from the beginning.
To return to a previous message, hold
down
REPEAT
until you see the desired
message number.
To skip to the next message, press
SKIP
.
To pause during playback, press the se-
lected line’s
PLAY
button.
PA
(pause)
appears. To resume playback, press the
selected line’s
PLAY
button again within
60 seconds. Otherwise, the TAD stops
playback, announces “End of messag-
es,” and displays the total number of
messages.
To quickly play a message, hold down
SKIP
. The playback speed increases, al-
lowing you to quickly scan a message or
move to any place within it. To resume
normal playback, release
SKIP
.
To stop playback at any time, press
STOP
. The TAD beeps and resets to an-
swer calls.
DELETING MESSAGES
To delete the current message during
playback, press
DELETE
. The TAD an-
nounces “Erase.” and beeps, then plays
the next message.
To delete all messages in a line after
playback, hold down
DELETE
until the
TAD says “Erase messages” and beeps.
dL
appears and the selected line indica-
tor next to each
PLAY
button that has
“played” messages flashes. Press the
selected line’s
PLAY
button. The TAD
sounds a long beep to confirm that all
messages in the selected line are delet-
ed.
Notes
:
The TAD does not delete unplayed
messages. If you press
DELETE
when you have unplayed messag-
es, the TAD sounds four beeps.
To cancel the delete function soon
after you press
DELETE
, press
STOP/TIME SET
. The TAD sounds
four beeps.
43-739.fm Page 14 Friday, August 13, 1999 2:00 PM