Radio Shack PRO-163 Two-Way Radio User Manual


  Open as PDF
of 3
 
PRO-163/PRO-164
CPU 1.07 Firmware Upgrade
RadioShack is ready to offer this free upgrade to fix the following problem using your
PRO-163/PRO-164(20-163/20-164) Triple Trunking Radio Scanner.
The problem is that when the same frequency is stored in the control channel of
Motorola System and of EDACS System, the software does not decode EDACS Control
Channel data properly.
Please take a moment to review the following instruction before proceeding with the
upgrade.
IMPORTANT NOTICE: You must upgrade your RadioShack scanner with a firmware
upgrade obtained from RadioShack. Please note that firmware upgrades for
RadioShack scanners are not compatible with scanning receivers sold by other
manufacturers.
What you will need to upgrade your radio
You will need the following items to perform the CPU firmware upgrade:
• The upgrade application file, which is normally supplied in a self-extracting ZIP
archive along with this documentation. To download the file, visit the RadioShack
Support Site, at http://www.radioshack.com. Note that the upgrade package
contains two executable upgrade files, as follows:
• 20-163_164_v107_BOOT100.EXE (for use with 20-163 and 20-164 models
with Boot Version 1.00)
• 20-163_164_v107_BOOT101.EXE (for use with 20-163 and 20-164 models
with Boot Version 1.01)
• A RadioShack Catalog #20-047 USB scanner programming cable
• A personal computer running Windows™ 2000, XP or Vista
• A 20-163 or 20-164 scanner in need of a CPU upgrade
1
next