Filter
Top Products
7
Notes:
• Be sure to route the cable so it will not be
pinched by doors or stepped on.
Use the supplied mounting staples to hole the
cable in place. Simply position the cable
between the prongs of each staple you need,
then gently tap the staple with a hammer until
the staple’s gray coating touches the wall.
• To install the stations farther than 66 feet apart,
you can make a connecting cable of 22 gauge
wire (Cat. No. 278-862) and two
1
/
8
-inch two-
conductor plugs (Cat. No. 274-288).
43-222b.fm Page 7 Thursday, August 12, 1999 3:55 PM