Filter
Top Products
User Guide SoundPoint IP 670 Phone
3 - 10
Putting a Call on Hold
During a call, press or the Hold soft key. The hold icon will display as
the line indicator.
Press again or the Resume soft key to retrieve the call. The registered
line icon appears as the line indicator.
Multiple Calls on Hold
If multiple calls are on hold on a single Line Key, use and to switch
between the calls, then press the Resume soft key to retrieve the desired call.
If more than two calls are on hold on a single Line Key, an indication appears
on the graphic display, for example “2/3”, indicating that this is the second
call out of three calls.
If calls are on hold on more than one Line Key, you can view the details of the
calls on any Line Key by pressing that Line Key and holding it down for more
than two seconds. If a Line Key is depressed for less than a second, the first call
on hold on that Line Key will be retrieved.
Note
The Hold feature typically generates music or a beeping tone. Therefore, avoid
putting a conference call on hold.