Polycom IP 670 Cordless Telephone User Manual


 
User Guide SoundPoint IP 670 Phone
2 - 2
Configuring Basic Settings
You can configure the following basic settings through use of :
Appearance of the time and date
Display contrast
Backlight intensity
Headset Memory Mode
Headset hookswitch selection
Ring type
Language support (localization)
Graphic display background pattern
You can mute the microphone and adjust the volume using separate keys.
Changing the Appearance of Time and Date
The time and date appears on the graphic display of the SoundPoint IP 670
phone. If the phone cannot obtain a time and date from the call server, the
display will flash. Contact your system administrator if either the time or date
is incorrect.
You have control over the format of the time and date display and can turn the
display of time and date off. The default time and date format appears in the
following figure.
To configure the time and date:
1. Press .
2. Select Settings > Basic > Preferences > Time & Date.
3. Select from Clock Date, Clock Time, Clock Order, or Enable/Disable.