Filter
Top Products
Getting Started
1725-36027-001_C.doc 21
Menus
Menus are lists of options that appear when its activation key is
pressed. There are five menus: Line, Favorites, Function (FCN),
MENU display, and Standby.
Line menu
The Line menu allows you to activate a call on a selected line or to
view the status of lines.
View the five line appearances by pressing the
LINE key. The line
number and extension number of the first four lines are displayed.
Press the
LINE key again to view the fifth line. Active lines are in bold
face. Defined but unregistered lines are faded. Lines that have been
forwarded are prefixed with the greater-than character (
>) followed
by the forwarding destination.
Pressing the
LINE key from the active mode displays a menu of line
appearances as programmed in the SIP TFTP configuration file. The
LINE key can be pressed while the handset is in the standby mode to
activate the handset and to activate a new call on the selected line.
The currently selected line is indicated by an asterisk (
*). Lines for
which the corresponding proxy server has outstanding new mail are
flagged with plus (
+) characters. Lines that should be registered to a
proxy but have failed registration for any reason are displayed in
faded text and are not selectable from the menu.
Exit the
LINE display by pressing a line number key to start a new call
on the selected line and put any other call on hold, or by pressing the
End Call key to exit without starting a new call. Press the More softkey
to page through additional items on the Line menu.
Pressing the
LINE key from the active mode displays a list of line
appearances as programmed in the SIP TFTP configuration file. The
line appearances are mapped to corresponding line icons. The
LINE
key can be pressed while the handset is in the standby mode to
activate the handset.
The currently selected line is indicated by an asterisk (
*). Lines for
which the corresponding proxy server has outstanding new mail are
flagged with plus (
+) characters. Exit the LINE display by pressing a
line number key or by pressing the
End Call key. The LINE display may
be used during a call to examine the status of other lines while you