Plantronics CS 60 Corded Headset User Manual


 
2. To lift the telephone handset from its cradle at your command even when you are away from
your desk.
The installation of the Handset Lifter (17) is described in the user guide that is supplied with it.
MAKING A CALL USING THE LIFTER
Press the Talk Button (20) on the headset. The lifter will raise the telephone handset off the hook.
You will then hear a dial tone in your headset and can proceed to make a call as normal.
When you have finished your call press the Talk Button (20) on your headset. The handset lifter
then lowers the handset to end the call.
RECEIVING A CALL USING THE LIFTER
When a new call is received the telephone rings as normal, but in addition, a ring alert comprising
a repeating sequence of three short beeps will be heard in your headset.
Note: This additional call alert is only active when the Lifter (17) is connected.
To answer the call press the Talk Button (20) on the headset. The lifter will then raise the
telephone handset off the hook and you will then be able to talk to the caller.
When you have finished your call press the Talk Button (20) on your headset. The handset lifter
then lowers the handset to end the call.
IntelliStand
TM
FUNCTION
When the CS60 DECT Wireless Headset System is used in conjunction with a Plantronics Handset
Lifter (17), you can enable the IntelliStand feature.
The IntelliStand senses when the headset has been removed or replaced in the CS60 Base Unit,
automatically activating the lifter to answer or end a call.
The IntelliStand feature is disabled when the IntelliStand switch (5) is in position I or enabled when
the switch is in position II.
SWITCHING FROM HEADSET TO HANDSET WHEN USING THE LIFTER
If during a call you are using your headset and want to switch to the telephone handset, remove
the handset from the Lifter, then press the Talk Button (20) on your headset. The Lifter will lower
and you will then be able to continue the call using the handset.
SWITCHING FROM HANDSET TO HEADSET WHEN USING THE LIFTER
If during a call you are using the telephone handset and want to switch to your headset, press the
Talk Button (20) on the headset. The Lifter will raise and you will be able to continue the call using
your headset.
Replace the telephone handset on the Lifter. When the call is finished press the Talk Button (20)
on your headset. The Lifter will lower the handset and end the call.
UK
7