Philips SBC RU 220/00 PDAs & Smartphones User Manual


 
RU220- page 6
6
SBC RU 220 Instructions for use
READING OUT THE 3-DIGIT BRAND CODE
After using autosearch to set up the SBC RU 220, note the 3-digit code for
future use.
1. Press the button of the device [TV or VCR] you want to read the code from.
2. Press and hold 1 and 6 at the same time for 3 seconds.
The indicator LED lights up.
3. Press -/--;
The LED indicator goes out.
4. Press 1:
the indicator starts to blink; Count the number of blinks for the first digit.
Note: if the indicator does not blink, the digit is 0.
5. Press 2:
the indicator starts to blink; Count the number of blinks for the second
digit.
6. Press 3:
the indicator starts to blink; Count the number of blinks for the third digit.
7. Write down the code inside the SBC RU 220's battery lid.
FREE-PHONE HELP-LINE
If you have any problems with your Philips Universal remote control, please ring
our free-phone help-line.
United Kingdom: 0800-968-118
Ireland: 1-800-533-136
Before calling, note the data of your equipment in the table below.
This makes it easier and faster for us to help you.
Type-numbers can usually be found in the original manual, or on the factory
plate on the back of the equipment.
English
Device
TV
VCR
Brand Model nr. RC model nr. Used code